Product overview of Stirring tooth transfer Rotary drum granulator:
This machine is a new generation of rotary drum granulator developed by the staff of our company based on years of experience in compound fertilizer production. The machine has the characteristics of beautiful appearance, simple operation, low energy consumption, long life, uniform drying, and convenient maintenance. It is a relatively advanced granulation equipment in China. Large-scale production of mixed fertilizer, the product has now spread all over the country.
Working principle of Stirring tooth transfer Rotary drum granulator:
The working principle of this series of stock transfer granulator is: the belt and pulley are driven by the main motor, and are transmitted to the driving shaft through the reducer, and the split gear installed on the driving shaft is connected with the large ring gear fixed on the machine body. Together, work opposite each other. The material is fed from the feed end and passes through the inside of the cylinder. Through the function of the special structure inside the cylinder, it is made into granules, and finally flows out through the discharge port. Due to the continuous input of materials and the continuous rotation of the granulator, mass production can be realized.
Its specifications and models are relatively complete, classified according to cylinder diameter as 1.2m, 1.5m, d1.8m, 2.0m, 2.2m, p2.4m, dp2.6m, p2.8m, p3.0m, 3.2m, 3.4m, 4.1 m, etc., the length of the cylinder has specifications such as 8m, 10m…26m, etc., and can also be produced according to the length required by the user; according to the transmission form, it is divided into the right side and the left side (from the feed end > transmission, If it is not specified when signing the contract, it shall be configured according to the transmission on the right side; according to the bearing capacity, the transmission device has a true coupling type and a pinion assembly type; in order to facilitate transportation and installation, when the cylinder is long, separate processing is used, and on-site docking and Integral.
Performance of Stirring tooth transfer Rotary drum granulator:
The rotary drum granulator is the main equipment in the compound fertilizer production equipment. It is a compound fertilizer granulation process that completes the chemical reaction and heat supply in the drum. Drum granulator is a molding machine that can make materials into specific shapes, suitable for cold and hot granulation and large-scale production of high, medium and low concentration compound fertilizers. The main working method is granulation wet granulation. Through a certain amount of water or steam, the basic fertilizer is fully chemically reacted after the humidity is adjusted in the cylinder. Under certain liquid phase conditions, the rotation of the cylinder makes the material particles Generate extrusion force to agglomerate into balls.
The main features of Stirring tooth transfer Rotary drum granulator are as follows:
1. Less investment, quick results, good economic benefits, performance can be sold:
2. Small power, no discharge of three wastes, stable operation, convenient maintenance, reasonable process layout, advanced technology, and low production cost; 3. High ball forming strength, good appearance quality, corrosion resistance, wear resistance, and low energy consumption;
4. The barrel is lined with a special rubber plate or an acid-resistant stainless steel liner, which realizes automatic scar removal and tumor removal, and cancels the scraper device that transmits the full screen;
This series of rotary drum dryers has been recognized by the Agricultural Technology Research Institute of the Soil and Fertilizer Station of the Henan Provincial Department of Agriculture, and has filled the domestic gap. It is a national environmental applicable technology promotion project.
